UNIVERSAL MITER SAW LED LIGHT DEWALT KIT FOR NOT PREWIRED MODELS

Description

For sale is a LED kit for the not pre-wired miter saws, one's what have a
channel to run the wires, covered with plastic fascia also
could be used for similar applications with the other stationary tools like a grinding machine, etc. There is no separate power supply needed.The LED is warm white color - about 3.5K and bright, but not too bright - 380 Lm - and will reduce the strain on the eyes in a dark
environment
and eventually WILL save your fingers from cutting, plus it quickly pays for itself by the material you save doing right cuts every time . LED will throw nice ambient light in complete darkness, plus blade will form the shadow in exact spot where the cut will be made, no adjustment necessary - see photos. (also in the night photo light appears brighter that it actually is - due to the camera exposure - its not blinding! :-)).
Bright L.E.D.  delivers enhanced visibility.
Illuminates Work Surface for increased productivity.
Blade Shadow cut line delivers fast accurate alignment.
No adjustments required for accurate repeatable cuts.
inexpensive
no extra power outlet or power supply needed
no extra switches - the light will turn on as soon you plug the saw to the
receptacle to show you it plugged and power is on
very low power consumption and long life
This is a DIY kit and as such is not for everyone. You have to be handy and know what you are doing. Assembling is not difficult - again you just to have to know what you're doing - don't kill yourself and disconnect the power before installing.
Kit consist of a 120V LED bulb soldered to about 12 inch long wire, sealed with the wire shrink; Fuse holder and 1AMP fuse; 3 ps of
Quick Wire Splice Clips Terminal Connectors.
You just need to partially disassemble the blade guard and handle, drill 2 holes in the end piece, run wires among the way and connect to the input wires. Electrically:
1.Locate the wires coming from the power receptacle - it is black and white.
2.
Connect one end of one wire from the fuse assembly to the black, make sure it is isolated well.
3. connect the other wire from the fuse assembly to the one of the wires going to the LED bulb(black or red).
4. Connect the other wire from the LED to the white wire from the power receptacle.
That's it! It will take you 30 min to the hour.
For the older models - you have to run the wires "outside" - see my other kit - the wires will be longer (28") and
encapsulated
in 24" silicone tubing - moisture, UV and temperature resisted up to 500F.
I will ship fast priority mail and will need about 24 hours to "assemble" the kit.
If you need custom size, just let me know - in most cases price will be about the same.
Thank you for your interest!