Transtar 2K Kwik Prime, DTM Primer Surfacer, Gallon - 6441

Description

Listing Template 2018
Home
About Us
Shipping
Returns
View Feedback
Contact Us
Transtar 2K Kwik Prime, DTM Primer Surfacer, Gallon - 6441
Transtar 2K Kwik Prime, DTM, Gallon - 6441
DTM (Direct-to-metal):
two component primer surfacer can be directly applied to metal surfaces
Fast drying formula, can be sanded wet or dry
Excellent filling and high build
Corrosion resistant
Can be used on properly sanded and degreased existing finishes, aluminum, steel and galvanized
Good adhesion and protection
when applied directly to bare steel
To prepare the surface
Wash it thoroughly with soap and water. Rinse   well and wipe dry with a clean cloth. Use a suitable solvent to clean    the surface and wipe with a clean cloth. Sand the repair area with    80-grit sandpaper and later with 120-180 grit. For application, activate   primer as per the mix ratio 4:1 or 4:1:1. Remember to keep the    activator closed properly to prevent moisture contamination when it is    not in use. Stir properly and use a gun to apply 2-3 medium wet coats,    leaving a flash of 2-3 minutes between coats.
Technical Specifications
Size: Gallon
Actual V.O.C.: 2.8#/gal
Regulatory V.O.C.: 3.6#/gallon
Category: Primer
Color: Light Gray
Shelf Life: 1 year
Mix Ratio (by volume): 4:1 or 4:1:1
(Activator and Reducer sold separately)
Reducer Up to 20% Transtar Urethane Grade Reducer if desired
Pot Life: 3 hours @ 70°F and 50% RH
Viscosity: 20-25 seconds
Coverage: 4:1 620 ft2/gallon and 4:1:1 516 ft2/gallon
ABTM part number: TRE-6441
About Us
Based in United States, autobodytoolmart has been an eBay member since Jul 03, 2000
Feedback
We will always help you to have a 100% positive happy buying experience. Contact us if you are unhappy about any aspect of your purchase from us. We only want five star feedback from you so buy with confidence.
View Our Categories