TRANSTAR - 2k Epoxy Primer / Sealer Gray TRA-6134-6144 (QUART KIT)

Description

TRANSTAR 2K EPOXY PRIMER/SEALER GRAY (QUART) WITH 2K EPOXY PRIMER/SEALER TINTABLE FORMULA ACTIVATOR (QUART)
Description:
2K Epoxy Primer Sealer/Groundcoat is an exceptional lead and chromate free corrosion-resistant coating with excellent adhesion on a variety of properly prepared surfaces. 2K Epoxy Primer Sealer/Groundcoat improves
adhesion of body fillers and resists moisture damage caused by water permeation. If further reduced, this product may be used as a precoat or sealer/groundcoat prior to topcoating.
Sanding:
Bare metal - 80 to 150 grit
Existing finish - 220 to 400 grit
Mix Ratio:
1:1:10% one part primer sealer to one part activator to 10% Urethane Grade Reducer (TDS600 or TDS601)
Pot Life:
72 hours @ 77°F (25°C)
HVLP/LVLP:
HVLP spray Equipment:
Apply 1 - 2 medium wet coats
Allow 10 minutes flash time between coats
10 PSI Max (at aircap)
Dry to Sand Times @ 77°F and 50% Relative Humidity:
To Touch:
10 minutes
To Topcoat (or prime):
30 minutes
To Recoat (with itself)
: 10 minutes
To Apply Polyester Primer:
24 hours
Max Recoat (without sanding):
72 hours
Suitable Substrates:
Steel, OEM Finishes, Galvanized Steel, Cured, Sanded Body Filler, Aluminum, Fiberglass/SMC, Cured, Sanded Original Finishes
FREE SHIPPING TO THE LOWER 48 STATES
NO P.O. BOXES
HAWAII & ALASKA EXTRA SHIPPING COST
PROVISION Auto Body Supply
Providing Quality to Professionals. Buy with confidence.
Check out my
other items
!
for great deals.
Any questions please call us @
586-575-9300
Be sure to add me to your
favorites list
!
Sign up for my email newsletters
by adding my eBay Store to your Favorites
Stores