SprayMax 3680001, 1k Self-Etch Weld Thru Primer, Red Brown

Description

SprayMax 1 Part Filler Primer - Red Brown
This is a 1 part filler primer, red/brown in color. SprayMax 1 part filler primer is weldable and provides excellent adhesion and corrosion protection to bare metal (properly prepared steel, aluminum, and stainless steel.) This protection also applies to welded surfaces when the recommended application procedure is followed.
Salesman Notes:
SprayMax Aerosols work much like a conventional spraygun. It has high transfer efficiency, and great atomization.
How to Use:
First, shake can vigorously before using. Usually about 3-5 minutes and about 15 seconds every couple of minutes while in use.
As a Weld-Thru Coating:
SprayMax Red/Brown primer has excellent adhesion and anticorrosion properties. Red/Brown primer reduces Anti-Spatter, with no drag. This product doesn't burn away from the sides of the weld. Can be used on Zinc-Coated Steel, Anodized Aluminum, Hot-rolled or Cold rolled Steel, and many other surfaces.
Preparation:
Properly clean and sand surfaces to be primed. Use a good quality grease and wax remover to prep the surface before priming. Apply 1-2 coats of product to each mating surface. Allow 2-3 minutes between coats. Coating should be dry to touch before parts can be MIG welded.