JMS SPARKMAX - IGNITION SYSTEM VOLTAGE BOOSTER V2 - UNIVERSAL - P2100

Description

PowerMAX v2 • SparkMAX 25V or 31V • Universal Splice-In Ignition Booster
Double the output of your ignition system.
Eliminate spark-blow-out and run a wider gap on your spark-plug.
Use PowerMAX v2 to quickly and easily increase the output of your ignition system!
PowerMAX Version 2 upgrades include: New Case Higher Output & More Features!!
PM-2100 boosts & regulates the igntion voltage to 14.4v all of the time.
Designed to be activated at Wide Open Throttle.
Simple installation: PowerMAX splices into your existing ignition coil +12V DC feed wire.
Compatible with all 12V or 16V battery systems
Works on all Coil on Plug igntion systems.
Eliminate Spark-Blow-Out
Enjoy smooth acceleration and increased economy.
High Quality User Adjustable Hobbs Switch: Preset @ 5psi User Adjustable from 3psi to 7psi
Adjustable Voltage Ramp In / Ramp Out • Choose a Time Ramp or from a monitored 0-5v sensor
Green Status LED: Know at a glance what the unit is doing.
Blinking LED = Boosting Voltage
Optional Remote Voltage Control Knob: Over-Ride the voltage output when the knob is connected (PM-2999)
Enable Voltage Boosting with Ground or via a monitored 0-5v external sensor.
Each PowerMAX v2 Kit Contains:
44 Amp PowerMAX V2 Voltage Booster Wiring Harness Installation Kit Set of Instructions
Installation Kit Contains:
1 - Hobbs Switch Preset @ 5psi (user adjustable 3-7psi) 1 - Fitting 1/8npt Female to 3/16" Male Barb 1 - Vacuum Tee 3/16" x 3/16" x 3/16" 1 - Vacuum Tee 1/4" x 1/4" x 3/16" 1 - Vacuum Tee 3/8" x 3/8" x 3/16" 1 Foot of 5/32" vacuum hose 1 - 30amp mini-fuse solder 2 - 10/12gauge Heat Shrink Butt Splices 2
- #8 stud 18/22 gauge wire Heat Shrink Ring Terminal
1 - 10 gauge Heat Shrink Ring Terminal 6 - Zip Ties 6 - Self drilling hex screws mini screw-driver