DeWalt DE7187 DW7187 Laser Guide for DW713 DW715 DW716 DW717 DW718 Chopsaw Miter

Description

This listing is for
DeWalt DE7187 DW7187 Laser Guide for DW713 DW715 DW716 DW717 DW718 Chopsaw Miter
Item:  Laser attachment / guide
Brand:  DeWalt
Model:  DE7187 , DW7187
Misc:
-For use with type 1 and type 2 designs of saws DW713, DW715, DW716, DW717 and DW718 (see note below).
-Will work with power switch from DW7085 LED system (power switch model DWS7085); see "alternative power switch", below:
A buyer has recently bought an original power supply from eReplacementParts .  The part number is N078832. (updated 12/29/19).
You can also find the power supply on eBay by doing a search for N078832. (updated 4/7/20).
Otherwise,
>>> Please read ALL OF THE BELOW information to ensure this will work with your saw <<<
Power Switch is NOT INCLUDED but may be located under a plastic cover on your saw, there is a video on youtube showing it's location (search youtube for "
Installing LED work light on my Dewalt miter saw"; this guy installs the DW7085 LED light system which is installed the
exact same way
and whose power switch is compatible with this laser guide (credit: youtube user Jason)).
IMPORTANT:  It has been brought to our attention that not ALL Type 1 and Type 2 saws have the Power Switch pre-installed.  Please manually inspect your saw to ensure the Power Switch is present as noted/seen above in the youtube video, or see the "alternative power switch" below:
ALTERNATIVE POWER SWITCH
:  As far as we know, the Power Switch DW7187 is no longer sold in stores and cannot be found online.  However, the power switch DWS7085 which comes with the LED work light system shown in the youtube video
will work for this laser attachment guide
.  The voltage is exactly the same, and the amperage needed for the laser guide is far below the max amperage of the power switch.
Please note the following from the DeWalt 7187 manual:
"Designed exclusively for use on type 1 and type 2 designs of these saws DW713, DW715, DW716, DW717 and DW718 DEWALT® miter saws and will not fit any other DEWALT® miter saw or any other miter saw brand."
Be certain what "Type" saw you have before purchasing this laser. The saw "Type" can be found on the Warning label of the saw directly to the left of the serial number. Check this before ordering or you may be disappointed. If you are buying a new saw, the only way to determine the "Type" designation is to take the saw out of the box and inspect the label. There is no "Type" designation on the outside of the box.
Tip:  It may beneficial to use some loctite on the spring loaded screw to reduce the calibration needed over time.
Thanks for looking!
___________________
**Free Shipping via USPS Priority Mail (2-3 day arrival time)
**U.S. shipper
--Returns/exchanges are accepted!