6 Gauge set w/o senders,Speedo,Tacho,Oil,Temp,Fuel,Volt, W/W/R

Description

PLEASE DOUBLE CHECK YOUR SIZING AND APPLICATION PRIOR TO ORDERING.
This set is delivered with required signature due to the prices. This is a measure we do to protect from theft.
****IF USING AN AFTERMARKET UNIT, YOU MAY NEED A TACH ADAPTER****
These gauges may require professional installation. The tachometer has to be programmed.
New 6 Gauge 316L SS Bezel Set
Sensors not included
• Set includes 6 gauges: Speedometer, Tachometer, oil pressure, water temp, fuel & volt meter.
• Speedometer and Tachometer Specs:
• Tachometer
◦ Auto 4, 6, 8, 10 and 12 cylinder
◦ Marine Gas 2 and 4 cycle
◦ Marine/Auto Diesel input from your Hall effect transducer or alternator W output
• White face, 316L Stainless Steel bezel.
3-3/8” or 86mm mounting Footprint.  Bracket Mounting.

AMP 8-pin connector wiring.
Speedometer - Easy setup with GPS Antenna. 

Accepts all input signals.
 Red LED back lighting.
 Lighted Red Pointer. 

Step motor design.
•
Accessory Gauges
• 316L Stainless Steel bezel with white face.
• All gauges except volt meter will work on 12 and 24 volt systems
• 90 degree sweep.
2-1/16” or 52mm mounting holes, screw on.
Bracket stud type connection.
 Red LED back lighting.
 RED pointer. 
Input ranges: 
Oil pressure: 240-33 ohms, show 0-100 PSI
Fuel level: 10-180 ohms, E - F (VDO style)
Temp: 240-33-33 ohms, 100-250 F
Volt: 10-16 V



Sender:
GPS External Antenna is included
.
*These gauges are Water Resistant, NOT Waterproof*
PLEASE NOTE: ANY MODIFICATION, DAMAGE OR DISMEMBERMENT TO ANY PART OR PARTS OF THESE GAUGES WILL BE CONSIDERED NON-REFUNDABLE.