10 BOX Mirka Abranet Abrasive 220 Grit 6 inch Mesh Sanding Grip Disk 10 PK Box

Description

Mirka Abranet 9A-241-220RP 220 Grit 6 inch Mesh Sanding Disks (10 Sheets in Box)
High Performance and Longer Life Span Than Other Traditional Abrasives
Longer Life Equals A Cost Effective Solution
Designed for Dry Sanding by Either Machine or Hand
Cleaner Work Environment, Better Finishes, A True Dust Free Product
Perfect for Woodworking, Auto Refinishing, Paint, Metal Working and the Marine Industry
Size: 6 inch Disk
New in Convenient Sturdy Shop Ready Box of 10
Mirka describes is like this:  “
The patented construction consists of a dense network of polyamide fabric threads onto which the net abrasive grit is bonded. This open weave, net structure means that no dust particle is more than 0.5 mm from a dust extraction hole. The result is phenomenal dust extraction across the entire abrasive surface and virtually dust-free sanding
.”
“ – We shortened that explanation to:
”Just Plain AWSOME !”
Available in Economical and Convenient Boxes of 10 – perfect for small shops like mine - easy on your shop space and easy to access and easy to keep organized.  The boxes are strong and easy to stack or shelve, quick and easy to open and grab a sheet.  - Or if you prefer, also available in boxes of 50 for high-volume operations or for the grit or two that you use the most.
Positively the finest most versatile abrasive made Period !
Our woodshop is always buzzing with work on wooden boats, refitting yacht casework and interiors and all sorts of other fun, and it is a rare day that d/a’s and sanders of various sorts aren’t heard buzzing somewhere nearby.  Close to all of our work stations is a good supply of Abranet and Abralon.   Yellow Mirka tools loaded with Mirka Abrasives are all over the place.
One of our Mottos at Jean Street Shipyard is that we only sell the products that we really use ourselves in our own shop, and really believe in ourselves.  If its not good enough for us – we wont sell it to you!  Almost 30 years ago at a woodworking show, a Mirka Rep gave me a few sheets of Mirka Abranet to try.  (hard to believe since back then we were actually a 3m abrasives dealer).  After a few months of sitting on a shelf in the shop I finally tried it and ever since that first day Abranet  has been our Abrasive of choice.  One try and we were sold and I believe it will be the same when you try it yourself – its that much better.  It is the most innovative solution to controlling sanding dust, but it is also the finest abrasive paper we have ever used.  Longest lasting – most consistent – best finish !
It would be enough to brag on the fine, super consistent scratch free sanding you get that is second to none among the world of abrasives.  But that’s just scratching the surface (if you will pardon the pun).
For Dust collection, forget choosing between 5 hole, 8 hole etc,   Abranet is just that – a net, a mesh – it’s a screen so every square millimeter of the Abrasive is collecting dust.  We even have a mirka sander with Mirka Abranet set up in our Spray Finish Room for touch ups, that’s how confident we are on its dust free ability.  If used with the right Mirka Pad on a quality d/a, such as the Mirka  DEROS and a good quality HEPA vacuum, such as the Mirka Vacuum, or the Festool Vacuum, or the Fein Vacuum, it is truly virtually dust free – Both the air and the surface of whatever you are sanding.  It is so truly amazing – you have to try it and see it to believe it.  Dust free is great for a safe and healthy workplace, but as a side benefit, the fast extraction of dust also helps to prevent “pilling”.  Every tradesman, not just woodworkers, have felt the frustration of having a workpiece almost perfect just to have it suddenly get scratched by dust pilling up in the abrasive.  Just keep a light touch (don’t push) on your sander and use Mirka Abranet and a good dust collector and the heartbreak of pilling is almost forever eliminated.  The secret to sanding with a light touch is a very sharp and consitant abrasive particle.  Mirka Abranet has you covered there !
But its Amazing Dust – Free properties are not its only attractiveness.  It is also an amazing abrasive.  Longer lasting and washable.
It is not an “abrasive screen” it is a screen with a consistent sized abrasive perfectly bonded to to the screen’s fibers.  It is the perfectly flat, scratch-free abrasive.  Unlike some of the “look-alike” products, the bond is amazing.  In other products, the bond quickly fails and soon you are sanding with the screen.  (more like scratching up your work with only the screen)  We have found it wears significantly longer  then any other brand we have used, and in 178 years in business, I can safely say we have tried them all.  That alone would be enough to make it the most economical abrasive out there, but it doesn’t stop there.  As every woodworker knows, very often is softer wood or sappy woods or when sanding substrates that already have finish on them, the abrasives will sometimes clog up long before they wear out, but the result is unfortunately the same, time to get another sheet!  Not so fast with Abranet.  Although designed primarily for dry sanding, we have found that with the screen construction and the waterproof properties of the bond of Abranet, we routinely take the clogged abrasive to the sink and give them a quick wash and rinse with warm water (sometimes a little spray of soap  and/or a quick wipe with a finger brush) and set them aside to dry.  The clogging is gone, and since the abrasive itself it still sharp and not worn out, we get easily two or three more uses out of every sheet.  Try that with other abrasives.   As a bonus, because Abranet with its sharp and consistent abrasives can be used with a lighter touch than other abrasives, clogging is not as likely to begin with, but how great that when it does, its not the end of that piece of abrasive.  We find this a great benefit in our shop.
Mirka describes is like this:  “
The patented construction consists of a dense network of polyamide fabric threads onto which the net abrasive grit is bonded. This open weave, net structure means that no dust particle is more than 0.5 mm from a dust extraction hole. The result is phenomenal dust extraction across the entire abrasive surface and virtually dust-free sanding.”
“ – We shortened that explanation to:
”Just Plain AWSOME !”
We are barraged with endless free samples of abrasives from the various manufacturers and jobbers and dealers – we give them a try – but in 30 years, none have changed our mind.  Not even close!
So… Don’t take our word for it – try one of our “Assortment Packs”  you will be sold !
And Thanks for shopping with
Jean Street Shipyard
.
We care for our products because we care about our customers.  Your purchase will be carefully packaged by our own ship’s store staff, not someone at some far away fulfillment center.
When we say your item is
"new"
, then that’s what you get.  We don’t sell seconds, overstocks, obsolete or outdated inventory or anybody’s rejects as new product.   We are a High Volume, authorized Reseller of Mirka Tools and Abrasives.
Our inventory is right on hand in our own store, and is carefully selected using the experience that comes with 175 plus years in business in the Marine industry.  We have been in the same place, same building,  doing the same thing since 1843, and we are standing by now to serve
your
boating needs.  We Only sell and endorse the products that we use ourselves and products that have stood the test of time.  We have been around long enough to see what works and what doesn't.  We are a full service working woodshop and boatyard.  We use what we sell every day.
When you need assistance or have a problem, you don't get somebody in some far away call center reading que cards, we will put you in touch with a skilled professional right from our own shop that actually uses the product, someone who has likely also had your question or problem as you.
Get the advantage of a small business that has time to
care about every single customer
and also has the years of experience to help you properly.
Like to know more about us ?? ...
Google us -
Jean Street Shipyard
Tampa Florida
See you again soon!
By the way…
Jean Street Shipyard
stocks
thousands
of items right in our own store.  We strive to stock the products that most boaters and woodworkers need, and have it handy and always ready to ship.  We are adding products to our eBay store every day.  So if it’s not here, or if you don’t see exactly what you need, chances are that we have it stock or can get it for you quickly.  Please message us, email us, or give us a call.  We are standing by to serve you.
If you need larger quantities of an item that is online at our store please contact us.
We can handle special orders and build lists.  Give us a call!
Return Policy: If this purchase does not meet your expectations or is not as described or photographed, or even if you just changed your mind or ordered the wrong part - its all OK - please contact us within
30 days from delivery to your shipping address for return instructions, or just return it through eBay.
We want to make your Online experience as seamless and easy as coming in person.  So no stress, we will make it work.
If you have a warranty problem, we have a good reputation with our venders  We will contact them for you, they usually listen to us, we can ship you an exchange without the time to wait for an answer from the manufacturer.
We strive to meet your expectations!
All offered items by Jean Street Shipyard, new, used or pre-owned are selected by us for High Quality and Excellent value.
Contact us via text; phone; message or via email for inquiries or questions.
or stop by and pay a visit!